Suchergebnisse

Keyword: ‘alpha’

Umbau: Pohlforce Alpha 2 “fallout”

3. August 2010 Keine Kommentare

Alpha_glow_3

deutsch205 Nach dem Glow Spacer für das Alpha und den Glowscales für das Bravo hier nun ein Alpha in komplett Glow. Schalen und Spacer wurden aus nachleuchtendem Acryl gefertigt. Im Tageslicht ein klassisches Ghostgreen und im Dunkeln leuchtend, wie nach einem Unfall im AKW.

english204 We made a Glow Spacer for Pohlforce´s Alpha Folder as well as some Glowscales for the smaller Bravo 1. This time it´s a full glow Alpha 2 with acrylic scales and backspacer. Ghostgreen during the day and glowing in the dark like sth. bad happened at the nuclear power plant.

Mehr…

Categories: new projects

Umbau: Pohlforce Alpha 1 “Gentleman” pt.3

2. August 2010 Keine Kommentare

Gentleman_Alpha_1

deutsch205 Mittlerweile haben wir schon eine Menge Alphas zu Gentleman Versionen umgebaut. Diesmal hat das Alpha vorab schon eine ordentliche Behandlung erfahren. Klinge, Schrauben und Bauteile wurden poliert und bilden die Basis für diesen Gentleman Folder. Schalen aus Kohlenstoffmicarta mit einer Einlage aus Markassar. Wir sind von Gesamtpaket extrem angetan!

english204 A lot of Gentleman Alphas have left our place since we made the 1st. step. This time the metal parts got polished before the knife showed up here. We machined cf micarta scales with Markassar inlays to make it the perfect Gentleman Alpha!

Mehr…

Categories: new projects

Pohlforce Alpha 3 “3G”

12. Juli 2010 Keine Kommentare

A3s_1

deutsch205 Auch vor dem 3. Streich aus dem Hause Pohlforce machen wir nicht Halt. Das Alpha 3 mit 3 x “G”. Grooved, Grenade, Glow!

english204 Pohlforce´s Alpha 3. Here we go: Grooved, Grenade, Glow!

Mehr…

Categories: new projects

Pohlforce Alpha Two “Hybrid”

4. März 2010 1 Kommentar

A2_hybrid_2

deutsch205 Das Alpha 2 in futuristischem Gewand. Als Material für die Schalen haben wir unser hauseigenes Hybrid verwendet. Auf einen Träger aus Aero Carbon kommt eine Lage Gewebe auf Metallbasis. Ein kleines Highlight sind die Flanken der Schalen, die die unverkennbare Carbonstruktur aufweisen. Daneben zeichen sich die Schalen durch eine besonders Hohe Widerstandsfähigkeit aus.

english204 Pohlforce´s Alpha 2 meets the future. We machined the scales from our own hybrid. It´s  Aero Carbon with an aramid top sheet. Have a closer look on the scales´sidewalls. These feature the distinctive carbon fibre pattern. In addition to a great look the scales are extremly tough, which is a result of the metall based top sheet!

Mehr…

Categories: new projects

Pohlforce A2 “gentleman” 1st step.

25. Februar 2010 Keine Kommentare

A1_palisander_1

deutsch205 Wir wurden gefragt, ob wir auch Schalen mit Inlay machen können. Hier sind sie. Alpha 2 Schalen aus carbon micarta mit Palisander Inlay. Nicht gerade unaufwendig, aber das Ergebnis kann sich, wie wir finden, sehen lassen. Unser Kunde bekommt für sein A2 jetzt noch eine Klinge aus SB1. Ich bin gespannt auf das Endergebnis.

english204 We´ve been asked if we can make inlays for our scales. Here we go. cf-micarta scales with rosewood inlays. It was one of our most difficult projects but we are proud of the result. Now our customer is waiting for his SB1 custom blade. Stay tuned for more information.

Mehr…

Categories: new projects

Special Deal 02/10 Pohlforce Alpha 1/2 “mayhem”

25. Februar 2010 Keine Kommentare

A2_maniac_1

deutsch205 Cuscadi Special 02/10: Pohlforce Alpha 1/2 Scales “mayhem” – grooved. Partiell gegroovedes Carbon Micarta. Überschliffen und geölt. Für Euch zum Special Preis von € 85,- inkl. Versand in D.

english204 Cuscadi Special 02/10: Pohlforce Alpha 1/2 Scales “mayhem” – grooved. Fractional grooved CF- micarta. Grinded and Oiled. Special deal: € 85,- incl. shipping in GER. Ask for int´l shipping.

Mehr…

Categories: news

Pohlforce Alpha 2 “desert storm”

19. Januar 2010 Keine Kommentare

A1_sand

Heute wurden die neuen Schalen für das Alpha 2 von Pohlforce fertig. Glasgeperltes Micarta in braun/sand. Die Schalen wurden unregelmäßig geperlt, was Ihnen eine schattierte Optik verleiht. Zum Schluss noch über die Drahtbürste gejagt und hier sind sie! Wem es gefällt, der kann hier einen Satz zum Preis von 85,- Euro ordern.

merci,

Luke

Categories: new projects

Pohlforce Hornet XL “reshape” grooved

17. September 2009 1 Kommentar

Hornet_3

Im Oktober kommt das Alpha Two von Pohlforce auf den Markt. Es wird eine überarbeitete und modifizierte Version des Alpha One sein. Um allen Fans der Messer aus dem Hause Pohlforce die Wartezeit zu versüßen, haben wir uns dem Hornet angenommen. Mehr…

Categories: new projects, news

Pohlforce Alpha One “tactical” customized

8. September 2009 Keine Kommentare

A1_grooved_6

Das Alpha One aus der Feder von Dietmar Pohl. Was man von Pohlforce hier für 139,- € bekommt ist gigantisch, was nicht nur für die Abmessungen gilt. Mit einer 11,3 cm langen Klinge aus 440C (58-59 HRC), einer Gesamtlänge von 26cm und 11mm Hohlachsen ist das Alpha 1 auf jeden Fall ein ordentlicher Brocken an Messer, was allerdings nicht verwundert, liegt beim Alpha 1 der Fokus ganz klar auf Einsatz- und Praxistauglichkeit. Mehr…

Categories: new projects, news

Aus Pohlforce H3 Alpha One wird H-Waii Alpha Sun

12. August 2009 Keine Kommentare

IMG_1291

Was der Sommer mit uns macht ist doch SCHE*#%E. Weder Fisch noch Fleisch. Da wirds eigentlich Zeit für Urlaub in der Sonne.
Aus diesem Grund haben wir uns das Alpha one von Dietmar geschnappt und ein Urlaubsmesser draus gemacht. Mehr…

Categories: new projects

New projects: Benchmade, Kershaw, Böker, Pohlforce

2. August 2009 Keine Kommentare

IMG_0500
We worked on Kershaw´s “Segal”. After we removed the ray inlay we replaced it by a well marbled cocobolo.
The wooden inlay is a little thicker than the original inlay so we beveled the edges a bit.
Mehr…

Pohl Force “Alpha One”

29. April 2009 Keine Kommentare

a1


(for english version see below)

Unser Freund Dietmar Pohl hat zusammen mit dem Ausbildungsteam H3 das Alpha One entwickelt.

Wir kamen in den Genuß uns von Dietmar das Teil mal vorführen zu lassen und können nur sagen: “TOP”.

Der erste Schwung hat Pohl Force nun verlassen und ist unterwegs zu den ersten, die das A1 ihr Eigen nennen dürfen.

Hier mal ein paar kurze Infos:

Stahl: 440 C (DIN 1.4125) Klinge mit perlgestrahlter Oberfläche, Rockwell-Härte 58.
Griffschalen: 4 mm starke Griffschalen aus glasfaserverstärktem Zytel®-Kunststoff mit Mold Tech® 11050 Struktur, 2 mm starke Edelstahlplatinen
Gesamtlänge: 26 cm
Klingenlänge: 11,3 cm
Klingenstärke: 5 mm
Gewicht: ca. 220 g

für weitere Facts und Specs lohnt sich ein Blick auf Pohlforce

anbei ein Bild des Pohlforce A1 H3 in Action

________________________

Our friend Dietmar from POHLFORCE just released the 2nd. Pohlforce Knive, the H3 A1.
In association with US based H3(former HSS international), Dietmar developed that powerful knife.
When he visited our office he gave us a detailed overview and keynote and we have to admit, that he really knows what a strong knife should look like.

some specs:

feel free to visit POHLFORCE for further information.

btw: the first A1s just left PF´s headquarter…

the A1 in action.
h3-a1-outdoor-in-action

best,

Luke & Team CSD

Categories: news

service / int´l orders

15. Januar 2009 Comments off

Bored of your serial knife? The factory scales don´t catch your eye anymore?
CUSCADI is your source for custom scales.

We offer synthetic and wooden custom scales for various knives such as Benchmade, Spyderco, Strider, Cold Steel, Böker, Wenger, Victorinox, Pohl Force and others.

start

__________

manufactures / modells:


Check the list for available modells:

Benchmade:

  • 707
  • 710
  • 730
  • 55x (Griptilian, Mini Griptilian – Ritters included)
  • 520
  • 522
  • VEX

Spyderco:

  • Tenacious
  • Delica
  • Endura
  • Dodo
  • Stretch
  • UK Pen Knife
  • Military
  • Paramilitary
  • Mule

Strider:

  • AR
  • WP
  • PT
  • SNG
  • SMF

Böker:

  • subcom
  • subcom fixed
  • wharcom
  • rescom
  • hyper
  • trance
  • Automat 101
  • MPT

Pohlforce:

  • Hornet
  • Alpha One

beside the listed modells and manufactures we also offer scales for knives by WENGER, VICTORINOX, COLD STEEL, MÜLLER and others.

If your knife isn´t listed, it doesn´t mean you can´t get it.

Just feel free to ask us!!! We´ll try our best to help you!

__________

materials:


We also offer various materials you can choose from.

sythetics

synthetics:

  • Aero Carbon
  • Hybrid
  • AS-I (Carbon Micarta)

  1. gloss
  2. grinded
  3. grooved
  • G10 yellow
  • G10 translucent green
  • G10 white
  • CDM (laminated carbon particle board)
  • CEM white with tonal pattern (glass fibre based with an epoxy paper coating) HIGH TECH!!!

woods

woods:

  • cocobolo
  • ziricote
  • bocote
  • bloodwood
  • ebony
  • markassar

  1. white
  2. black
  • blued cottonwood
  • palisander

You want to get a material which is not listed? Don´t worry – ask us and we´ll see if we can get it!!!

__________

options:


glow

each scale set is cnc machined and features chamfared edges for better handling.

since we call it custom we offer various options to choose from:

  1. choose if and where you wanna have a clip. We don´t like unnecessary drills allover the handle.
  2. choose from various spacer shapes (Benchmade Griptilian, 710)
  3. You don´t like a lanyard hole? No Problem!
  4. Do you like glow spots? Ask us to place it!

  • white / “super blue” glow
  • green / “high intense green” glow
  • red / “”poison” glow

Last but not least, our full custom service.

You don´t like the handle´s shape? You want a shorter or totally reshaped scale?

Ask us, we will try to make it.

ATTENTION: This option is not available for all modells / items.

__________

specs:


to make sure that you know what we offer, just have a look at our specs:

Benchmade Griptilian / mini Griptilian (Ritter included)

scales: 4mm

spacer material: carbon / AS-I

spacer options:

  1. flush
  2. lip
  3. reptilian

clip options:

  1. right pocket tip up
  2. left pocket tip up
  3. no clip

_____

Benchmade 707:

scales: 3mm

spacer material: carbon / AS-I

spacer options:

  1. flush

clip options:

  1. right pocket tip up
  2. left pocket tip up
  3. no clip

_____

Benchmade 710:

scales: 3mm

spacer material: carbon / AS-I

spacer options:

  1. flush short
  2. flush long

clip options:

  1. right pocket tip up
  2. left pocket tip up
  3. no clip

more options:

4mm scales with a dent around the axis lock for better handling

_____

Böker Subcom/Wharcom/Rescom:

scale: 4 mm

scale design:

  • classic
  • hidden axis
  • hidden axis w/ glow spot

__________

international orders / worldwide shipping


YES, we do ship worldwide! Tell us what you want and we´ll help you out.

We are proud to offer:

  • low shipping rates (certified mail worldwide)
  • tracking no. provided
  • paypal accepted

intlorder

__________

Any questions left?




Related Posts with Thumbnails
Categories: news